Search

New

GTX Mesh Coils | PM80 Replacement Coils | Vaporesso

  • Vaporesso GTX Mesh Replacement Coils are designed for use with the Vaporesso Target PM30 |Target PM80 | Target PM80 SE pod kits & the PM80 Pod Cartridge. All GTX coils are made from the highest Nichrome element mesh wrapped with pure spun flax and organic cotton wicking blend providing you with the best performance and brimming flavour, money can buy.

    The 0.2ohm GTX Mesh Coils are rated for use between 45Watts(W) to 60W and the 0.3ohm GTX Mesh Coils are rated for use between 32W to 45W. They are both made of Nichrome and are designed for smooth DL (direct lung) vaping.

    The slightly restricted airflow of the 0.6ohm coil, provides the best flavour out of the range of the GTX coil series. The warmer release of flavour is the perfect balance of clouds, flavour and looser airflow. Rated at 20 to 30W the 0.6 GTX coil is the most compatible coil across the range of GTX devices.

    GTX 0.8ohm Mesh coils are the perfect balance for mouth to lung vaping. Diamond mesh kanthal element is rated for use between 12 to 20W with a medium restricted draw and throat hit.

  • Vaporesso GTX Mesh Replacement Coils
    Manufacturer: Vaporesso
    Single Diamond Mesh Coil
    Plug & Play Pod Design

    0.2ohm GTX Mesh Coils
    Resistance: 0.2ohm
    Single Diamond Mesh Coil
    Mesh Element: Nichrome
    Wattage Range: 45W to 60W
    Designed for: Direct to Lung (DL)

    0.3ohm GTX Mesh Coils
    Resistance: 0.3ohm
    Single Diamond Mesh Coil
    Mesh Element: Nichrome
    Wattage Range: 32 to 45W
    Designed for: Direct to Lung (DL)

    0.6ohm GTX Mesh Coils
    Resistance: 0.6ohm
    Single Diamond Mesh Coil
    Mesh Element: Kanthal
    Wattage Range: 20 to 30W
    Designed for: Restricted Direct to Lung (RDL)

    0.8ohm GTX Mesh Coils

    Resistance: 0.8ohm
    Single Diamond Mesh Coil
    Mesh Element: Kanthal
    Wattage Range: 12 to 20W
    Designed for: Restricted Mouth to Lung (RML)

    GTX RBA Rebuildable
    Resistance: 0.7ohm
    Coil Element: Kanthal |DIY or Premade

    0.2ohm, 0.3ohm & RBA GTX coils are only compatible with: Target PM80 | Target PM80 SE Pod kit | GEN Nano | Xiron

    0.6, 0.8 & 1.2ohm GTX coils are compatible with all Vaporesso Target PM30 | Target PM80 | Target PM80 SE Pod kit | Xiron | GEN Nano | GTX One

  • 5x Vaporesso GTX Mesh Coils
    or 1x Vaporesso GTX RBA Kit

Target PM80 SE Pod Kit

One of the most well thought out and visually appealing sub ohm pod mods on the market, the Vaporesso Target PM80 SE Pod Mod is super comfortable in hand and so simple to use.

With intelligent coil detection, the PM80 SE automatically recognises the resistance of the installed coil and sets up a recommended power preset without you having to lift a finger. 

Target PM80 can bring you a powerful and extra intelligent vaping experience. What's more, Target PM80SE compatible with Vaporesso GTX  series coils, including GTX 0.2Ω MESH coil, GTX 0.3Ω MESH coil, GTX 0.6Ω MESH coil, GTX 0.8Ω MESH coil, GTX 1.2Ω MTL

Vaporesso 0.2 ohm GTX Mesh Coil is rated for use between 45 and 60W.

The 0.3 ohm GTX Mesh Coil, rated for use between 32 and 45W, are both made of Nichrome and are designed for smooth DTL(direct-to-lung) vaping. 

The 0.6 ohm GTX Mesh Coil, rated for use between 20 and 30W

0.8 ohm GTX Mesh Coil, rated for use between 12 and 20W, are both made of Kanthal and are designed for satisfying Restricted DTL vaping.

Target PM80 Replacement Pods

The Target PM80 & PM80 SE pod Kits both take the same 4ml pod cartridge. PM80 Replacement Pods are super convenient with large bottom fill port, magnet mod connection & are fully compatible with Vaporesso's push-in GTX mesh high performance coils.

Vape Kits, Coil & Battery Care Disclaimer

Vape Kits: Sub-ohm devices are strictly for advanced users and is not recommended for beginners or anyone who does not fully understand battery Amp limits in correlation with coil resistance. As extra care should always be taken when using a sub-ohm devices & vape kits, more vaping experience is required to use this kit safely. Sub-ohm coils will only work on a mod capable of firing sub-ohm coil heads and Ni200 coils will only work on a device capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps. 

Temperature Control: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. 

Battery Care and Charging: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. All Li-ion & Nickel-Metal Hydride batteries may vent or explode if they are misused. Never leave your batteries unattended while they charge & do not charge it in your vehicle. Always remove batteries from charger when they are done charging. Never store batteries loosely in a pocket or purse. Never allow foreign metallic items come in contact with any part of the battery. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Never discharge a battery past its specified cut-off voltage, which is typically 3.0 volts. Never surpass the batteries’ specified discharge rates given by the manufacturer. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Vape Bureau will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries or battery powered devices. Please examine the device upon delivery for any manufacturer defects. Vape Bureau is not responsible for any damage caused by the misuse and/or mishandling of this sub-ohm devices, coils, batteries and tanks.

Domestic and International Travel with Batteries: Batteries pose a unique hazard during air transport and can cause a fire if not transported correctly. The carriage of portable electronic devices (PED) and batteries is for personal use and to assist you from carrying any batteries and quantities that are prohibited by law. Spare or loose batteries - Are those batteries not installed in the device, carried separately or items such as power banks/packs designed to power or back-up another device. Spare/loose batteries (including power banks/packs/holders/storage cases must be in carry-on baggage only and must be protected against short circuit by, placing in its original retail packaging, placing each battery in a separate plastic bag or protective pouch or insulating terminals by taping over exposed terminals. Refer to Virgin Australia Airline here and Vape Bureau FAQs for further information.