LVS 4-in-1 Coil Jig | Black

  • If you're already rocking RDAs, RTAs or RBAs and are thinking about doing some DIY coil building, make sure you get started with a great coil jig.

    LVS 4-in-1 Coil Jig is perfect for creating vape coils as small as 2mm and as large as 3.5mm with consistent precision. The coil tool comes with 4 interchangeable stainless steel winding rods to meet your building needs - 2.0mm, 2.5mm, 3.0mm & 3.5mm diameter.

    The notched handle gives you a firm grip so you can stay focused on the business of creating your next coil masterpiece. You can also store up to 3 winding tips inside the handle, with the forth winding tip secured in place by the top wire guide.

    The coil guide has 2 deep grooves, so you can lock down the wire tail and form the start of your coil wrap. The 18mm long winding tip is just the right length for your coil wraps and short enough not to catch the vape wire as you wind away.

  • Manufacturer: LVS
    Model: Lvs 4-in-1 Coil Jig

    Material: Aluminum / Stainless Steel
    Dimensions: 130mm x14mm Diameter
    Features: 4x Interchangeable Winding Rod Tips (2.0mm, 2.5mm, 3.0mm & 3.5mm)
    Removable End Cap for Internal Tip Storage
    Wire Guide Head & Notched Finger grip Handle

  • 1x Black Lvs 4-in-1 Coil Jig
    1x SS Winding Rod Ø 2mm
    1x SS Winding Rod Ø 2.5mm
    1x SS Winding Rod Ø 3mm
    1x SS Winding Rod Ø 3.5mm

Notify me when this product is available:

Coil Head & Vape Kit Disclaimer

Sub-Ohm Coils: Coil heads also known as atomiser heads for Sub-ohm vaping are strictly for advanced users and is not recommended for beginners or anyone who does not fully understand battery Amp limits in correlation with atomiser resistance. Sub-ohm coils will only work on a mod capable of firing sub-ohm atomisers and Ni200 coils will only work on a device capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps. Vape Bureau is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm coils and/or devices.

Temperature Control: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. Vape Bureau is not responsible for any damage caused by the misuse and/or mishandling of temperature control devices. 

Battery Care and Charging: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. All Li-ion & Nickel-Metal Hydride batteries may vent or explode if they are misused. Never leave your batteries unattended while they charge & do not charge it in your vehicle. Always remove batteries from charger when they are done charging. Never store batteries loosely in a pocket or purse. Never allow foreign metallic items come in contact with any part of the battery. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Never discharge a battery past its specified cut-off voltage, which is typically 3.0 volts. Never surpass the batteries’ specified discharge rates given by the manufacturer. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Vape Bureau will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries or battery powered devices. Please examine the device upon delivery for any manufacturer defects. 

Domestic and International Travel with Batteries: Batteries pose a unique hazard during air transport and can cause a fire if not transported correctly. The carriage of portable electronic devices (PED) and batteries is for personal use and to assist you from carrying any batteries and quantities that are prohibited by law. Spare or loose batteries - Are those batteries not installed in the device, carried separately or items such as power banks/packs designed to power or back-up another device. Spare/loose batteries (including power banks/packs/holders/storage cases must be in carry-on baggage only and must be protected against short circuit by, placing in its original retail packaging, placing each battery in a separate plastic bag or protective pouch or insulating terminals by taping over exposed terminals. Refer to Virgin Australia Airline here and Vape Bureau FAQs for further information.