Search

New

SMOK RGC and RPM Replacement Pods| 5ml

  • The SMOK RPM80 Pro is equipped with two interchangeable Pods which adapt to two different resistances for two different types of vape. 

  • The SMOK RPM Replacement Pod suits lower wattage which is great for vape Nic Salt and mouth to lung (MTL) vaping. RPM Replacement Pods are only compatible with SMOK RPM, RPM Mesh, RPM RBA and Nord coils.

    The SMOK RPM80 RGC Replacement Pod takes full advantage of higher wattage, lower resistance coils and adjustable airflow. These Pods are specially designed for RGC Conical coils that provide a direct-lung (DL) experience, great flavour and mighty cloud production.  SMOK RGC Replacement Pods are only compatible with RGC Conical coils and RGC RBA atomisers.

    You get the best of both worlds with the RGC's fully adjustable dual airflow. The bottom airflow ring allows you to dial it down for a tighter draw (MTL) while adjusting up to just the right balance of flavour and clouds (DL).

  • Manufacturer:  SMOK
    Model:  RPM Replacement Pod
    Capacity:  5ml
    Large Top Fill Port 
    Transparent Pod Cartridge Design
    Plug and Play coil installation
    Coil Compatible:  RPM, RPM Mesh, RPM RBA and Nord coils.

    Manufacturer:  SMOK
    Model:  RPM80 RGC Replacement Pod
    Capacity:  5ml
    Large Top Fill Port 
    Transparent Pod Cartridge Design
    Coil Compatible: RPM80 RGC Conical coils and RGC RBA.

    Please note: Coils are not included with Replacement Pods.

  • 3x SMOK RPM80 RGC Pods
    or 
    3x SMOK RPM Pods

Pod devices are where it's at!

Pod AIO devices are all the go right now. Their popularity has soared due to the Pod Mod's small form-factor, convenience and innovation of reusable Pod tanks and plug-n-play coil systems. The SMOK RPM80 Pro is the first Pod tank that has a fully adjustable air-flow collar allowing you to customise the air-draw to your preference. The SMOK RGC Pod is sleek and sits flush with the pod installed while the drip tip protrudes approximately 13mm for a comfortable vaping experience. eJuice can be top filled by unplugging the black silicone tab located on the top of the pod with a maximum juice capacity of 5ml.

The SMOK RPM80 Pro measures 118mm by 31.9mm by 26mm and features a zinc alloy construction, making this device a solid every day user. The RPM80 Pro utilizes a three button layout to manipulate the controls.

Performance

The RPM80 Pro comes with a wattage range of 1-80 watts, providing a great power range for a pod device. These are powered by a replaceable battery, so when the battery runs out you can simply replace it with a ready charged 18650 battery.

No down time

The RPM80 Pro is powered by an external 18650 battery, which can provide plenty of power for a pod device. The brains behind this device is the IQ80 chip set, which provides a range of safety protections and informs the colourful user interface screen.

Coil Compatibility

The SMOK RPM80 RGC Replacement Coils are designed for the new RPM 80 and RPM 80 Pro Kits. You can choose from a variety of RGC Conical Mesh Coils or the RGC RBA deck. RPM80 Pro Kit also comes with the RPM pod allowing you more coil options with RPM coils at lower wattage

Pod Compatibility

Designed specifically for use with the SMOK RPM80 and SMOK RPM80 Pro, these replacement pods offer a juice capacity of 5.0mL and use RPM and RGC coils respectively. Used on both the RPM80 and RPM80 Pro, there are two options available, the RPM which uses the already existing RPM series of coils, and the RGC which uses the all new RGC coils. Both variations offer the 5.0mL juice capacity and are easily filled through the use of a top filling system. RGC coils offer adjustable airflow through the use of a valve on the coil base. Coils are installed through the use of an easy to use plug and play system that eliminates the chance of anything like cross threading or over tightening.

Vape Kits, Coil & Battery Care Disclaimer

Vape Kits: Sub-ohm devices are strictly for advanced users and is not recommended for beginners or anyone who does not fully understand battery Amp limits in correlation with coil resistance. As extra care should always be taken when using a sub-ohm devices & vape kits, more vaping experience is required to use this kit safely. Sub-ohm coils will only work on a mod capable of firing sub-ohm coil heads and Ni200 coils will only work on a device capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps. 

Temperature Control: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. 

Battery Care and Charging: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. All Li-ion & Nickel-Metal Hydride batteries may vent or explode if they are misused. Never leave your batteries unattended while they charge & do not charge it in your vehicle. Always remove batteries from charger when they are done charging. Never store batteries loosely in a pocket or purse. Never allow foreign metallic items come in contact with any part of the battery. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Never discharge a battery past its specified cut-off voltage, which is typically 3.0 volts. Never surpass the batteries’ specified discharge rates given by the manufacturer. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Vape Bureau will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries or battery powered devices. Please examine the device upon delivery for any manufacturer defects. Vape Bureau is not responsible for any damage caused by the misuse and/or mishandling of this sub-ohm devices, coils, batteries and tanks.

Domestic and International Travel with Batteries: Batteries pose a unique hazard during air transport and can cause a fire if not transported correctly. The carriage of portable electronic devices (PED) and batteries is for personal use and to assist you from carrying any batteries and quantities that are prohibited by law. Spare or loose batteries - Are those batteries not installed in the device, carried separately or items such as power banks/packs designed to power or back-up another device. Spare/loose batteries (including power banks/packs/holders/storage cases must be in carry-on baggage only and must be protected against short circuit by, placing in its original retail packaging, placing each battery in a separate plastic bag or protective pouch or insulating terminals by taping over exposed terminals. Refer to Virgin Australia Airline here and Vape Bureau FAQs for further information.