Target PM80 SE Pod Kit | Vaporesso

  • Vaporesso Target PM80 Special Edition Pod Kit is the latest release of the Target PM80 Pod Mod series.The Target PM80 SE Kit brings the best design features of the PM80, with the addition of smart coil detection and is now powered by your choice of removable 18650 battery.

    This beautifully designed pod mod is visually appealing with an ergonomic comfortable grip, perfectly positioned fire button, sleek lines and contemporary finish and texture. Powered by a rechargeable 18650 battery (sold separately), the PM80 SE 80W utilises the AXON Chipset to support instant-fire vaping and has an intelligent coil recognition feature that recommends power output for the coil you've installed.

    The kit includes two Vaporesso TARGET PM80 pod cartridges with 4ml e-juice capacity that are easy to clean and refill. The drip tip mouthpiece is super comfortable and airflow is controlled by press-fit silicone plugs positioned on each side of the AIO mod battery. You can leave the plugs in place for a tight flavourful draw or remove them to push out some massive clouds.

    Replacing your coils is a breeze with the press-fit coil design of Vaporesso's GTX replacement coils. The Target PM80 SE Vape Pod kit includes the 0.2ohm GTX Mesh Coil, rated for use between 45 and 60W and the 0.6ohm GTX Mesh Coil, rated for use between 20 and 30W.

    Sub-Ohm vapers now finally have the convenience of a powerful and design-driven advanced pod device that is compact, simple to use with features to suit your busy lifestyle.

  • Target PM80 Special Edition Pod Kit
    Model:  Target PM80 SE Pod Mod Kit
    Manufacturer:  Vaporesso
    Ergonomic and Compact Design
    Dimensions:  121mm x 25mm x 34mm
    Materials: Zinc-Alloy | Dura PCTG Pod Plastic
    Powered By AXON Chipset
    Variable Wattage with Smart Voltage Detection
    Wattage Output Range: 5 to 80W

    Removable Single High Amp 18650 Battery (not included)
    Recommend: Sony VTC4 18650 Rechargeable Battery
    Tactile Fire Button
    Clear 23mm Screen Display

    4mL Refillable Pod Cartridge
    Two Silicone Airflow Plugs
    Bottom Plug 'n' Play Coil Installation
    Bottom Fill System - Silicone Stoppered
    Bottom Hinged Battery Door
    MicroUSB Port

    Compatible with Vaporesso GTX Coil Series
    0.2ohm GTX Mesh Coil - rated for 45 to 60W
    0.6ohm GTX Mesh Coil - rated for 20 to 30W

    Vaporesso Protection Suite: Overtime Protection
    Overheat | Over Charge | Short-Circuit | Incorrect USB Input | No Load Protection

  • 1x Vaporesso TARGET PM80 SE Device
    2x Vaporesso TARGET PM80 Pod
    1x 0.2ohm GTX Mesh Coil
    1x 0.6ohm GTX Mesh Coil
    2x Silicone Airflow Plugs
    1x USB Cable
    1x User Manual
    1x Warranty Card & Reminder Card

2 items left

Target PM80 SE Pod Kit

One of the most well thought out and visually appealing sub ohm pod mods on the market, the Vaporesso Target PM80 SE Pod Mod is super comfortable in hand and so simple to use.

With intelligent coil detection, the PM80 SE automatically recognises the resistance of the installed coil and sets up a recommended power preset without you having to lift a finger. 

Target PM80 can bring you a powerful and extra intelligent vaping experience. What's more, Target PM80SE compatible with Vaporesso GTX  series coils, including GTX 0.2Ω MESH coil, GTX 0.3Ω MESH coil, GTX 0.6Ω MESH coil, GTX 0.8Ω MESH coil, GTX 1.2Ω MTL

Vaporesso 0.2 ohm GTX Mesh Coil is rated for use between 45 and 60W.

The 0.3 ohm GTX Mesh Coil, rated for use between 32 and 45W, are both made of Nichrome and are designed for smooth DTL(direct-to-lung) vaping. 

The 0.6 ohm GTX Mesh Coil, rated for use between 20 and 30W

0.8 ohm GTX Mesh Coil, rated for use between 12 and 20W, are both made of Kanthal and are designed for satisfying Restricted DTL vaping.

Target PM80 Replacement Pods

The Target PM80 & PM80 SE pod Kits both take the same 4ml pod cartridge. PM80 Replacement Pods are super convenient with large bottom fill port, magnet mod connection & are fully compatible with Vaporesso's push-in GTX mesh high performance coils.

Vape Kits, Coil & Battery Care Disclaimer

Vape Kits: Sub-ohm devices are strictly for advanced users and is not recommended for beginners or anyone who does not fully understand battery Amp limits in correlation with coil resistance. As extra care should always be taken when using a sub-ohm devices & vape kits, more vaping experience is required to use this kit safely. Sub-ohm coils will only work on a mod capable of firing sub-ohm coil heads and Ni200 coils will only work on a device capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps. 

Temperature Control: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. 

Battery Care and Charging: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. All Li-ion & Nickel-Metal Hydride batteries may vent or explode if they are misused. Never leave your batteries unattended while they charge & do not charge it in your vehicle. Always remove batteries from charger when they are done charging. Never store batteries loosely in a pocket or purse. Never allow foreign metallic items come in contact with any part of the battery. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Never discharge a battery past its specified cut-off voltage, which is typically 3.0 volts. Never surpass the batteries’ specified discharge rates given by the manufacturer. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Vape Bureau will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries or battery powered devices. Please examine the device upon delivery for any manufacturer defects. Vape Bureau is not responsible for any damage caused by the misuse and/or mishandling of this sub-ohm devices, coils, batteries and tanks.

Domestic and International Travel with Batteries: Batteries pose a unique hazard during air transport and can cause a fire if not transported correctly. The carriage of portable electronic devices (PED) and batteries is for personal use and to assist you from carrying any batteries and quantities that are prohibited by law. Spare or loose batteries - Are those batteries not installed in the device, carried separately or items such as power banks/packs designed to power or back-up another device. Spare/loose batteries (including power banks/packs/holders/storage cases must be in carry-on baggage only and must be protected against short circuit by, placing in its original retail packaging, placing each battery in a separate plastic bag or protective pouch or insulating terminals by taping over exposed terminals. Refer to Virgin Australia Airline here and Vape Bureau FAQs for further information.